Wave Soldering Machine 当前位置: Home >>News>>News
Lead-free Automatic DIP Soldering Machine
Lead-free Automatic DIP Soldering Machine
 
ETA SMT DIP manufacturer provide best price lead-free DIP soldering, selective wave soldering machine, automatic DIP soldering machine, wave soldering equipment, with 2 hearting zones and 3 hearting zones.
Automatic DIP Soldering Machine
The work of the lead-free wave soldering machine is to start the plug-in circuit board in the process of being conveyed by the chain conveyor, and then preheat in the pre-heating zone of the lead-free automatic DIP wave soldering machine (the component preheating and the temperature to be reached are still predetermined Temperature curve control). In actual welding of lead-free wave soldering equipment, it is usually necessary to control the preheating temperature of the top surface of the component, so many lead-free wave soldering equipment have added corresponding temperature detection devices (such as infrared detectors). After preheating, the component enters the lead tank of the lead-free wave soldering machine for welding. The solder bath of the lead-free wave soldering equipment contains molten liquid solder. The nozzle at the bottom of the steel bath sets the solder to a certain shape. This way, when the soldering surface of the circuit board passes the wave, it is heated by the solder wave, and the solder wave is also Wet the soldering area and fill it with extensions, finally achieving the welding process. This whole welding process of lead-free wave soldering equipment is operated by one or two people. The following Chengyuan Automation will talk about the operating requirements of lead-free wave soldering equipment.
Wave Soldering Machine
Lead-free automatic DIP wave soldering machine
(1) Strictly control the computer parameter settings of the lead-free wave soldering machine according to the parameters given by the lead-free wave soldering production process;
(2) Record the operating parameters of lead-free wave soldering machine on time every day;
(3) Ensure that the distance between two consecutive plates placed on the spray-type lead-free wave soldering machine conveyor is not less than 5CM;
(4) Check the flux spray condition of the lead-free wave soldering machine every hour. The 5S condition of the spray extraction hood must be inspected every time the machine is turned on to ensure that no flux drips onto the PCB;
(5) Check every hour whether the peak of the lead-free wave soldering machine is flat and the nozzle is blocked by tin slag. The problem should be dealt with immediately;
(6) During the production process, if the operator finds that the parameters given by the process can not meet the requirements, he must not adjust the wave parameters by himself and immediately notify the engineer to deal with it.
❙  Automatic DIP Soldering Machine Video

文章From:http://www.wavesolderingmachine.com/te_news_media/2020-02-20/23161.chtml