What is Wave Solder Machine Do
From: Author:Wave Solder Machine Publish time:2020-11-30 15:35 Clicks:0
What is Wave Solder Machine Do
Wave soldering machine is a device for soldering circuit boards of electronic products. After plug-in electronic components are inserted on the circuit board, wave soldering is responsible for soldering them with tin. Wave soldering is divided into single wave soldering, oblique wave soldering, high wave soldering, hollow wave soldering, chaotic wave soldering, wide flat wave soldering, double wave soldering and selective wave soldering. At present, double wave soldering is the most widely used in the market.
Wave soldering equipment is an automatic soldering equipment developed on the basis of a dip soldering machine. The main difference between the two is the solder tank of the equipment. The electronic production kit is used when making electronic products. Wave Soldering machine uses the solder tank The mechanical or electromagnetic centrifugal pump presses the molten solder to the nozzle, forming a wave of solder that is steadily spouting upward, and continuously overflows from the nozzle. The printed circuit board with components passes through in a linear and planar motion The solder wave forms a wet spot on the soldering surface to complete the soldering.
The dual-wave system widely used in the market can generate two waves: turbulent wave and smooth (or laminar) wave, the principle of dual-wave soldering and the structure of wave soldering:
The wave soldering machine is mainly composed of a conveyor belt, a flux adding zone, a preheating zone, and a tin furnace.
The main purpose of the conveyor belt is to send the circuit board into the wave soldering machine, passing through the flux adding area, preheating area, tin furnace, etc. along the way.
The flux addition area is mainly composed of infrared sensors and nozzles. The function of the infrared sensor is to sense whether the circuit board enters. If there is a sensor, it will measure the width of the circuit board. The function of the flux is to form a protective film on the soldering surface of the circuit board.
The preheating zone provides enough temperature to form a good solder joint. Infrared heating can make the circuit board heat evenly.
❙ Wave Soldering Machine Video
